GenPod® 150 LRU
$26,090.00
Swap out the entire engine system in minutes! GenPod® 150 LRU (Line Replaceable Unit) includes all the necessary electronics, fuel pump system, EFI system, ignition, plus, motor mount isolation.
- Description
- Additional information
Description
GenPod® 150 LRU (Line Replaceable Unit) by HFE International enables users to swap out the entire engine system within minutes.
This system includes all the necessary electronics, fuel pump system, EFI system, ignition, plus, motor mount isolation. When it is time for the TBO overhaul, eliminate operational downtime by swapping the GenPod® LRU out for a new one.
GenPod® 150 LRU Key Features
Quick Mount Interface
This innovative feature allows users to swap engines in record time.
Zero Down Time
Maintain flight ops tempo: keep all vehicles in operation! A GenPod® 150 LRU, plus a spare, saves operators tens of thousands of dollars in scheduled maintenance down time.
Rapid Integration
The GenPod® 150 LRU integrates into new aircraft designs with very little R&D effort. Companies can spend hundreds of engineering hours determining placement of ECU components, fuel system lines and pump, and filters. And designing vibration isolation.
The GenPod® LRU eliminates all this work.
Simply plug in the power, connect the fuel tank and provide a throttle position. Start occurs with a simple 5V signal.
Built-In Starter Generator
Comes with a built-in starter and up to 500 W of electrical power for the avionics system.
The starter generator system, as well as power management unit, is included in the price.
GenPod® 150 LRU EFI UAV Engine Downloads
Additional Options
GenPod® 150 LRU is available in pusher or tractor configuration. Cowling options are available upon request. Faring mount points allow for special design covers over the GenPod®.
Power Management Voltage outputs can be factory set.
Note: PMU is a separate piece of hardware; it is not included in the engines weight and dimensions.
About HFE International
HFE International develops and manufactures high end propulsion systems for UAV’s, drones, unmanned systems, and ground support equipment. These propulsion systems include fuel-injection and rotary systems with gasoline and multi/heavy fuel operation.
Founded in 2010, the company’s aim was to address the growing demand for reliable, small engines at an affordable price point. With over 1,000 units sold – at 25% the cost of the closest competitor – HFE engines are in use throughout the world including use by the US Armed Forces.
Please contact HFE International for details about output options.
Additional information
Actual Displacement | 151 cc, 9.15 in³ |
---|---|
Momentary Peak Power @ rated RPM | 7.7 kW @ 7000 RPM, 10.3 hp @ 7000 RPM |
Max Continuous Power | 7 kW @ 6000 RPM, 9.37 hP @ 6000 RPM |
Peak Torque @ RPM | 11.2 NM @ 5000 RPM, 8.26 ft-lb @ 5000 RPM |
Cruise BSFC @ RPM | 400 g/kW-hr @ 5500 RPM, 0.657 lb/hp-hr @ 5500 RPM |
Standard Operating RPM Range | 3500 – 6500 RPM |
Full System Weight with Mufflers | 8.33 kg, 18.37 lb |
Full System Power to Weight Ratio | .92 kw/kg, 0.56 hp/lb |
Nominal Current Draw (12V) | 0.5 A |
Maximum Current Draw (12V) | 1 A |
Time between Overhauls | 300 hrs |