Fuel Systems Archives - HFE International

65 um Filter

HFE International — Wed, 22 Dec 2021 21:48:20 +0000

Filter for fuel lines to remove debris and particles found in the fuel. The mesh screening size limits the Hp range from 3 Hp to 20 Hp.

About HFE International

Founded in 2010, HFE International develops and manufactures high-end propulsion systems for UAVs, unmanned systems and ground support equipment. At a cost 25% less than the closest competitor, HFE meets the demand for small, reliable engines at an affordable price.

Over 1,000 HFE engines are in operation throughout the world — including use by the US Armed Forces. HFE propulsion systems include fuel-injection and rotary for gasoline and multi/heavy fuel operation.

90 QUICK CONNECT PLUG 1/4 BARB

HFE International — Thu, 03 Apr 2014 16:16:22 +0000

Designed for Gasoline, Diesel, Kerosene, JP8, JP5, and 100LL.

Mates with all other socket ELO2Y series couplers.

Working Pressure: 150 PSI
Material: 6061 Aluminum Olive Drab Hardcoat

EnduroLink is the best choice for extreme temperature fuel applications when vibration and dusty conditions are unavoidable.

AA2A2C

90 QUICK CONNECT PLUG 1/8 BARB

HFE International — Thu, 03 Apr 2014 16:18:48 +0000

Designed for Gasoline, Diesel, Kerosene, JP8, JP5, and 100LL.

Mates with all other socket ELO1Y series couplers.

Working Pressure: 150 PSI
Material: 6061 Aluminum Olive Drab Hardcoat

EnduroLink is the best choice for extreme temperature fuel applications when vibration and dusty conditions are unavoidable.

AA1A3B Drawing

90 QUICK CONNECT SOCKET AN-03

HFE International — Wed, 02 Apr 2014 23:54:16 +0000

Designed for Gasoline, Diesel, Kerosene, JP8, JP5, and 100LL.

Mates with all other plug ELO1Y series couplers.

Working Pressure: 150 PSI
Material: 6061 Aluminum Olive Drab Hardcoat

90 QUICK CONNECT SOCKET AN-04

HFE International — Thu, 03 Apr 2014 00:20:59 +0000

Designed for Gasoline, Diesel, Kerosene, JP8, JP5, and 100LL.

Mates with all other plug ELO2Y series couplers.

Working Pressure: 150 PSI
Material: 6061 Aluminum Olive Drab Hardcoat

EnduroLink is the best choice for extreme temperature fuel applications when vibration and dusty conditions are unavoidable.

AA2A5B Drawing

CHECK VALVE, GRAVITY SEAT, AN-04

HFE International — Thu, 03 Apr 2014 00:08:35 +0000

Nominal Flow Diameter: 0.172 Nominal Flow

Working Pressure Range: 29inHg to 100psi

Temperature Range: -32°C to +90°C

Suitable Fuels: Mogas, Avgas, Diesel and JP8

Other Applications: Compressed Air, Light Engine Oils and More. Please Consult Factory With Any Special Applications

Materials: Anodized 6061 Aluminum Body and End Connects, 3003 Hollow Aluminum Ball, 304 SS FOD Filter, GFLT Valve Seal, Viton Static Seals

The multi-fuel series is designed for use in the UAV unmanned air vehicle industry, enabling fuel flow in one direction only.

BA4A9A Drawing

Dual Head Fuel Pump

HFE International — Mon, 15 Feb 2016 18:22:08 +0000

The fuel pump provides regulated fuel pressure to the engine. The pump operates on 12 V and receives its power from the engine control module. The pump only runs when fuel pressure is low in order to conserve electrical power and reduce heat and vibration in the system. There is one fuel input and one fuel output, with a bleeder valve to prime the engine when installing.

Attributes

Weight: 150 g (5.29 oz)
Size: 1.75 x 2 x 2.35 inches

Fuel Fitting 90 Degrees (2 per pack)

HFE International — Fri, 26 Feb 2016 18:30:58 +0000

This fitting can be used as a substitute for the standard straight fuel fitting on the throttle body. Use this fitting if you need to make a sharp turn from the back of the engine. This fitting is a swivel type and can spin 180° independent of the thread.

Attributes

Designed for 2.4 mm ID fuel tube
180° swivel
Flat head screw drive (for tightening)
Viton (fuel safe) O-ring for tight pressure seal
Brass body
Metric M5 x 0.8 thread

Fuel Fitting 90 Degrees for 6mm Tubing (2 per pack)

HFE International — Fri, 12 Jul 2019 21:06:58 +0000

Fuel Fitting 90 Degrees for 6mm Tubing (2 per pack) by HFE International.

It is an alternative fuel fitting for the Desert Aircraft EFI fuel system. It can serve as a substitute for the standard straight fuel fitting on the throttle body. Use this fitting if you need to make a sharp turn from the back of the engine.

This fitting is a swivel type and can spin 180° independent of the thread.

Features

Designed for 6 mm OD fuel tube
180° swivel
Flat head screw drive (for tightening)
Viton (fuel safe) O-ring for tight pressure seal
Brass body
Metric M5 x 0.8 thread

About HFE International

HFE International develops and manufactures high end propulsion systems for UAV’s, drones, unmanned systems, and ground support equipment. These propulsion systems include fuel-injection and rotary systems with gasoline and multi/heavy fuel operation.

Founded in 2010, the company’s aim was to address the growing demand for reliable, small engines at an affordable price point. With over 1,000 units sold – at 25% the cost of the closest competitor – HFE engines are in use throughout the world including use by the US Armed Forces.

Fuel Fitting Straight (2 per pack)

HFE International — Fri, 26 Feb 2016 18:26:39 +0000

Replacement fuel fittings for the DA EFI system. These fittings fit on the Injector cap and the throttle body base. These fittings are designed to work with the fuel tube PN: HFE0172.

Attributes

Designed for 2.4mm ID tube
Brass Body
Viton Fuel proof O-ring Seal
M5 x 0.8 thread